Questions about DTM

Hi, I have some questions
1.What is the star that shows up next to the throttle sometimes?
2.What is the ECU on bottom right? *ECU currently running program)?
3.Can I show Lambda in Logs or in the 6Digital gauges?
4.What is logged?Which collumns are these?
5.If on Home screen(one with all values) I press on a value it becomes white. What this means? Just dont show?
6.If I press on ECU it says ECU OFF. Whats this means?
7. For Lambda value. Why it is in percentage? Usually it is in volts. Whats this percetage means?

Thanks

Hi, Kostas
1.What is the star that shows up next to the throttle sometimes?
an asterisk appearing next to Trottle value indicates 2 things, when the ECU interprets that the butterfly is resting (next to 0) and it is very important for the management of VAE and especially of "Cute Off", and then tells you when you exceed the throttle opening to the ECU management of "full load".

2.What is the ECU on bottom right? *ECU currently running program)?
6.If I press on ECU it says ECU OFF. Whats this means?
No, that disables the serial communication with the ECU, disable all communication.


3.Can I show Lambda in Logs or in the 6Digital gauges?
No, for now no....in the next update.
5.If on Home screen(one with all values) I press on a value it becomes white. What this means? Just dont show?
No, deactivate the request by the DTM of that value to the ECU. Need for speed all the loops, minus values are asked and the faster you run all requests. Expecially in the registration phase...

7. For Lambda value. Why it is in percentage? Usually it is in volts. Whats this percetage means?
No, volts is the exit of the probe, which is then managed by the control unit. the "correction" is expressed as a percentage more or less basic injection time.

If the time base is injection of 10ms and the lambda of +20% then corrects the total time is 12ms injection, if you read -20% then the total time is 8ms injection.

4.What is logged?Which collumns are these?

Corresponding values in order of registration:
Girimotore|tempoini|anticipo|pressionearia|temparia|tempacqua|angolofarfalla|batteria|OverBoost|angolofaseini|dutyvae|errore1|errore2|errore3|errore4

Reference and multiplier,
|Girimotore
|tempoini *100
|anticipo*100
|pressionearia*100
|temparia
|tempacqua
|angolofarfalla*100
|batteria*100
|OverBoost
|angolofaseini
|dutyvae*100
|errore1
|errore2
|errore3
|errore4

This is all, for now...

2) What is the number although? is it the program or something?
So when it is off DTM is not working?When have DTM on all the time is any difference for the ECU?

7)So when the value is + needs more fuel and when it is - needs less fuel.

2) What is the number although? is it the program or something?
So when it is off DTM is not working?When have DTM on all the time is any difference for the ECU?

the number indicates the response time in milliseconds of the ECU, that is the time that elapses between the request of DTM to ECU's response, this time will vary especially depending on rpm. The latency depends on the ECU, the DTM can work up to 0.2 ms ;)

7)So when the value is + needs more fuel and when it is - needs less fuel.

yes!