Hi, Kostas
1.What is the star that shows up next to the throttle sometimes?
an asterisk appearing next to Trottle value indicates 2 things, when the ECU interprets that the butterfly is resting (next to 0) and it is very important for the management of VAE and especially of "Cute Off", and then tells you when you exceed the throttle opening to the ECU management of "full load".
2.What is the ECU on bottom right? *ECU currently running program)?
6.If I press on ECU it says ECU OFF. Whats this means?
No, that disables the serial communication with the ECU, disable all communication.
3.Can I show Lambda in Logs or in the 6Digital gauges?
No, for now no....in the next update.
5.If on Home screen(one with all values) I press on a value it becomes white. What this means? Just dont show?
No, deactivate the request by the DTM of that value to the ECU. Need for speed all the loops, minus values are asked and the faster you run all requests. Expecially in the registration phase...
7. For Lambda value. Why it is in percentage? Usually it is in volts. Whats this percetage means?
No, volts is the exit of the probe, which is then managed by the control unit. the "correction" is expressed as a percentage more or less basic injection time.
If the time base is injection of 10ms and the lambda of +20% then corrects the total time is 12ms injection, if you read -20% then the total time is 8ms injection.
4.What is logged?Which collumns are these?
Corresponding values in order of registration:
Girimotore|tempoini|anticipo|pressionearia|temparia|tempacqua|angolofarfalla|batteria|OverBoost|angolofaseini|dutyvae|errore1|errore2|errore3|errore4
Reference and multiplier,
|Girimotore
|tempoini *100
|anticipo*100
|pressionearia*100
|temparia
|tempacqua
|angolofarfalla*100
|batteria*100
|OverBoost
|angolofaseini
|dutyvae*100
|errore1
|errore2
|errore3
|errore4
This is all, for now...
[Modificato da (Deltoz) 20/05/2015 16:35]